Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : Removing the rear light and replacing the Nissan Qashqai bulb

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Tail light
Operation: Removing the rear light and replacing the Nissan Qashqai bulb

In today's video we will see how to remove the taillight and how to replace the brake bulbs of a second series Nissan Qashqai. First of all we open the tailgate of the boot and with a socket wrench we unscrew the side nuts of the light; at this point we extract the light from the outside and disconnect its electrical connector to remove it permanently. By removing the bulb holder it will be possible to access all the bulbs: in this case, remove the one that is not working and replace it with the new one. We just have to reassemble everything, applying the reverse procedure!


Posted on 30 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Qashqai 2014-2022 - What problem can occur with the rear lights of a Nissan Qashqai? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos