Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the rear light bulb on Nissan Qashqai 1

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Rear light bulb
Operation: How to replace the rear light bulb on Nissan Qashqai 1

Let's see in this video how to remove and replace the headlight bulb of the Nissan Qashqai first series, following the instructions below. First we open the rear door and start by unscrewing the screws that we find on the sides of the rear light; then we gently push to remove it, disconnecting the electrical connector of the bulbs, as shown in the video. At this point we remove the cover and our lamp holder, thus replacing the bulbs contained inside; we just have to reassemble everything, following the video to the end!


Posted on 27 June 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2014-2022 - Why is the reverse light on my Nissan Qashqai not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos