Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Qashqai
    4. : How to replace the rear light bulb of the Nissan Qashqai?

Nissan Qashqai - Video tutorial

Model: Nissan Qashqai J11 - Years 2014-2022
Part: Rear light bulb
Operation: How to replace the rear light bulb of the Nissan Qashqai?

The replacement of the left rear headlight bulb of the Nissan Qashqai is a very simple operation, easily performed independently. Let's start by removing the clips and unscrewing the screws on the closing handle; starting from the clips on the sides, remove the cover of the tailgate. Remove the three connectors of the bulb holder and unscrew the three bolts along the perimeter of the headlight. Proceed by unscrewing the two nuts in order to remove the headlight from its housing. Insert the new bulb and reassemble the light fixture. Reinsert the headlight into its housing and connect the connectors. Finish the replacement by reinstalling the tailgate panel.


Posted on 29 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Qashqai 2014-2022 - Why is the reverse light on my Nissan Qashqai not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos