Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. : Cascada

Vauxhall Cascada - Videoguide

Vauxhall Cascada (2013-2019 / MK 1)
How to install an air deflector on the Opel Cascada.

In this video, we see how to install an air deflector on the Opel Cascada: this component reduces wind noise and turbulence while driving with the roof open. …read all…
Posted on 31 January 2024 by ScegliAuto
Vauxhall Cascada (2013-2019 / MK 1)
How to reset the service light on the Opel Cascada.

In the following guide dedicated to all of you who own an Opel Cascada, we will discover step by step how to correctly perform the manual reset of the service …read all…
Posted on 5 June 2023 by ScegliAuto
Vauxhall Cascada (2013-2019 / MK 1)
Where is the fuse box located in the passenger compartment of the Opel Cascada?

If you need to intervene on one or more electrical components of your Opel Cascada but you don't know where the fuse box is, don't worry because below you will …read all…
Posted on 31 March 2023 by ScegliAuto
Vauxhall Cascada (2013-2019 / MK 1)
How to locate the fuses and know their diagrams in an Opel Cascada

The first fuse box of a 2018 Opel Cascada car is located inside the vehicle cabin, exactly behind the dashboard to the lower left of the steering wheel. This …read all…
Posted on 22 April 2023 by ScegliAuto
Vauxhall Cascada (2013-2019 / MK 1)
Where is the horn fuse located in the Opel Cascada?

In the event that the horn of our Opel Cascada has suddenly stopped working, we can first of all check the status of the relative fuse and, if damaged, replace …read all…
Posted on 23 July 2022 by ScegliAuto
Checks and maintenance (1) Instrument cluster (1) Fuse box (2)

How to reset the oil warning light on the Alfa Romeo Giulietta

If you want to manually reset the oil change light on your Alfa Romeo Giulietta then this guide is all you need. You do not need any diagnostic tools and will be able to complete the whole procedure without any difficulty. First, go inside the car and make sure it is completely turned off. Then keep the accelerator pedal pressed and at the same time press the brake pedal six times consecutively. When finished, keep both pedals pressed and turn on the ignition. Press the brake pedal again six more times and keep both pedals depressed for approximately 50 seconds. Turn off the ignition. Release the brake pedal and hold the accelerator pedal for another 50 seconds to complete the procedure.

Watch the video!


by ScegliAuto

More videos