Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door panel of the Opel Cascada?

Model: Vauxhall Cascada MK 1 - Years 2013-2019
Part: Door trim panel

It will be possible to remove the door panel of the Opel Cascada by using a tool to pry off the trim located above the armrest. Once this cover has been removed, you can proceed to loosen the underlying screws so that you can then loosen the others. These will be located at the bottom of the panel and under the window switch panel: this can now be disconnected, allowing you to remove the panel and then insert the new replacement part, securing it properly with the screws.

Posted on 23 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Opel Cascada 2013 located?
Where is the OBD port of the Opel Cascada 2013 located?
Vauxhall Cascada (2013-2019 / MK 1) If you don't know where the OBD port of your 2013 Opel Cascada is located, don't worry because in the following guide you will find a description of …
Where is the fuse box located in the Opel Cascada cabin?
Where is the fuse box located in the Opel Cascada cabin?
Vauxhall Cascada (2013-2019 / MK 1) If you need to work on one or more electrical components of your Opel Cascada but do not know where the fuse box is, do not worry as you will find al…
How to Replace the Cabin Air Filter on the Opel Cascada
How to Replace the Cabin Air Filter on the Opel Cascada
Vauxhall Cascada (2013-2019 / MK 1) In the following guide, you will find the description of the steps to take if you want to replace the cabin air filter of your Opel Cascada yourself.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos