Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on the 2018 Opel Insignia

Model: Vauxhall Insigna MK 2, Insigna B - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this article, with the help of the video, you will see the procedure to reset the maintenance light on the 2018 Opel Insignia. It is recommended to perform this procedure only after completing the service.

To reset the light, first, turn on the instrument panel, then press the down arrow button to navigate the menu until you find the oil life option; once located, press the right arrow, at this point the reset option will appear, select it by pressing the OK button, and the reset will be executed.

Once the reset is done, restart the instrument panel to verify that the procedure was successful.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on the Opel Insignia
How to Reset the Maintenance Light on the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) In this guide, we will explore the steps and instructions to reset the service and maintenance light on the Opel Insignia. First, get inside the vehi…
How to Reset the Maintenance Light on an Opel Insignia B
How to Reset the Maintenance Light on an Opel Insignia B
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) In this video, you will see how to reset the maintenance light on an Opel Insignia B: first, get into the car and close the doors, then turn on the i…
How to Reset the Service Light on the Opel Insignia
How to Reset the Service Light on the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Today's procedure will show you how to reset the service light for the routine maintenance oil change on the Opel Insignia. First, get in the vehicle…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos