Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Opel Astra remote control battery

Model: Vauxhall Astra Astra K - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

Video tutorial

Let's discover the necessary steps on how to disassemble and replace the battery of the key remote of the Opel and Vauxhall Astra, as well as the Insignia. First, take our remote and start removing the plastic back cover by levering on the sides; then remove the battery inside, as shown in the video.

At this point, install the new battery, of the right type and with the same code (in this case a CR 2032 3V); insert it in the correct direction and reassemble the plastic cover to complete the replacement job.


Posted on 28 December 2024 by ScegliAuto


Related tutorials

How do you replace the battery of the Opel Astra remote control?
How do you replace the battery of the Opel Astra remote control?
Vauxhall Astra (2015-2022 / Astra K) The replacement of the battery of the Opel Astra remote control is done by lowering the small switch on the back, detaching the chrome cover of the t…
How do you replace the battery of the Opel Astra remote control?
How do you replace the battery of the Opel Astra remote control?
Vauxhall Astra (2015-2022 / Astra K) To replace the battery of the Opel Astra remote control, you need to pry at the bottom of the device so that you can completely detach the panel on t…
How to replace the remote control cover on the Opel Astra?
How to replace the remote control cover on the Opel Astra?
Vauxhall Astra (2004-2010 / Astra H) As seen in this tutorial, replacing the remote control cover on the Opel Astra is an extremely simple and quick operation. To do this, you will need …

Other guides you may be interested in

    Frequently Asked Questions

    • Astra 2004-2010 - Yellow "car with wrench" warning light on Opel Astra h, what does it mean? Read answer

How to Remove the Rear Bumper on a Peugeot 308

This article outlines the procedure to remove and replace the rear bumper on a Peugeot 308 T9. First, remove the screws located in the wheel arch of the rear wheels, then remove the plastic clips underneath the bumper. Next, take off the wheel arch cover, and remove the plastic nut. After removing the nut, disconnect the connectors present. Now, remove the fixing screws located underneath the bumper and also the plastic clips. Once all clips and screws are removed, you can take off the bumper for repair or replacement.

Watch the video!


by ScegliAuto

More videos