Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light on an Opel Corsa E

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Tail light

In this short but comprehensive video, we can see how to remove the rear light of an Opel Corsa E from its housing: we open the rear door and go to the sides of the interior trim, where we find an easily accessible door. Opening it, we can easily reach two black plastic knobs, unscrewing which we will loosen the sealing screws on the rear light unit. Now we can go to the outside of the car and gently pull the light towards us. We need to disconnect the electrical connector, and at this point we have access to the bulbs to be able to change them.

Posted on 15 February 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Remove the Rear Light on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) How do you remove the rear light from an Opel Corsa? Lift the boot to access the plastic covers in the luggage compartment. Remove the cover from the…
How to Remove the Headlight on an Opel Corsa
How to Remove the Headlight on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Remove the rear headlight on an Opel Corsa? Remove the rear headlight with all its components. Open the boot, then remove the cover cap located at th…
How to Replace the Rear Lamp Bulb on Opel Corsa
How to Replace the Rear Lamp Bulb on Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Are the rear lamp bulbs blown? Here's how to remove them from inside the lamp. Lift the tailgate of the Opel Corsa, identify the parts to disassemble…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos