Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to remove seat Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Seat
Operation: How to remove seat Opel Corsa

Let's see how to remove the front seat of an Opel corsa? This video explains how to proceed. First of all we move the seat back (with the electric buttons if present) and bring the seat up, then, with a socket wrench, unscrew the tightening screws placed on the front rail. We move the seat forward with the shift buttons and remove the locking pins from the rear of the rail. Finally we disconnect the power supply terminals of the front seat. We assemble the front seat of the car by carrying out the disassembly operations mentioned above.


Posted on 19 October 2023 by ScegliAuto



Seat removal on Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Slide the seat back and unscrew the two front bolts in the sliding bracket. Then slide the seat forward and unscrew the rear bolts, as shown in the v
How to activate the on-board computer of an Opel Corsa
Vauxhall Corsa (2019-2024 / Corsa F) Before we are able to begin, we will have to go and sit in the driver's seat of our Opel Corsa. So let's start by inserting the key into the ignition
How to remove the front seat of an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) How to remove the front seat of an Opel Corsa? Let's see how to remove the seat. We disconnect the power supply terminals (if there are electric butt

    Frequently Asked Questions

    • Corsa 2006-2014 - Why is the seat of the Opel Corsa locked? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos