Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seat on an Opel Vivaro

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Seat

Let's see how to remove the front seat (passenger side) on an Opel Vivaro: disconnect the power connectors first, then move the seat back (using the electric buttons if available) and raise the seat base. Next, use a socket wrench to unscrew the securing bolts on the front rail. Move the seat forward (using the adjustment buttons or metal lever) and remove the securing pins from the rear of the rail. Finally, disconnect the power connectors for the front seat. Reinstall the front seat by reversing the disassembly steps mentioned earlier.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat of an Opel Vivaro
How to Remove the Front Seat of an Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) How do you remove the front seat of an Opel Vivaro? This video explains the procedure: disconnect the power connectors (if present), use a socket spa…
How to disassemble the rear seat of the Opel Vivaro 2015
How to disassemble the rear seat of the Opel Vivaro 2015
Vauxhall Vivaro (2014-2019 / MK 2) If you own a 2015 Opel Vivaro and are wondering how to remove the rear seat by yourself, all you have to do is read the following procedure and apply…
How to replace the starter motor on the Opel Vivaro?
How to replace the starter motor on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) You can replace the starter motor on the Opel Vivaro by opening the bonnet to access the components in the engine compartment: the motor is located a…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos