Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Opel Insignia?

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

In order to reset the Service light that is shown on the instrument panel of the Opel Insignia, you need to scroll through the menu inside the instrument panel by turning the dial located on the left lever of the steering wheel. You should stop when you reach the option with the remaining oil life and its percentage.

To reset this percentage to 100%, simply hold down the SET/CLR button located at the end of the same lever. This will cause the text to start flashing, until it becomes steady again and the percentage of remaining life is brought back to the maximum.


Posted on 16 April 2025 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Opel Insignia
How to Reset the Service Light on the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Today's procedure will show you how to reset the service light for the routine maintenance oil change on the Opel Insignia. First, get in the vehicle…
How to Reset the Engine Oil Change Warning Light on an Opel Insignia
How to Reset the Engine Oil Change Warning Light on an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) After performing the routine maintenance service, it is necessary to reset the service warning light (oil change). Let's see the procedure on the Ope…
How to reset the Service light on the Opel Insignia?
How to reset the Service light on the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To reset the Service light on the Opel Insignia, turn on the instrument cluster by inserting the ignition key into the corresponding barrel. Once it …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos