Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the Opel Combo car radio

Model: Vauxhall Combo Combo E, MK 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car stereo

See other generations:
Video tutorial

In this guide we will see the instructions that will allow us to disassemble and replace the original radio of the Opel Combo. First of all, we get on board the car and start disassembling and removing the ventilation grilles; then we unscrew the fixing screws of the radio, disconnecting the electrical wiring found on the back to remove it, as shown in the video.

At this point, if necessary, we replace the radio with a new multimedia system, compatible with our car; we make the electrical connection and finally reassemble the parts of the dashboard!


Posted on 6 September 2025 by ScegliAuto


Related tutorials

Replacement of the Opel Combo antenna
Replacement of the Opel Combo antenna
Vauxhall Combo (2001-2011 / MK 3, Combo C) Today's steps will illustrate the process of disassembling and replacing the radio antenna of the Opel Combo, also removing its base. First, we get i…
Reset of the tire pressure warning light for the Opel Combo.
Reset of the tire pressure warning light for the Opel Combo.
Vauxhall Combo (2019-2026 / Combo E, MK 5) The guide in question will show us how to reset the tire pressure warning light on the Opel Combo. Before resetting the TPMS sensors, it is necessary…
Where is the fuse box located in the 2007 Opel Combo?
Where is the fuse box located in the 2007 Opel Combo?
Vauxhall Combo (2001-2011 / MK 3, Combo C) The 2007 Opel Combo has two fuse boxes. The fuse boxes are located inside the cabin and under the front bonnet. The first box is behind the left side…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos