Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light of the Opel Vivaro?

Model: Vauxhall Vivaro Vivaro C, MK 3 - Years 2019-2026
Part: Service warning light

From the instrument panel of the Opel Vivaro, you can reset the Service indicator by holding down the SET button located in the center of the instrument panel, while the ignition is off. By continuing to hold down this button, you can insert the ignition key into the ignition switch and turn it to activate the instrument panel. Once the instrument panel is turned on, you will see a countdown starting from ten, during which you must continue to hold down the button. At the end of the countdown, you can release the button to verify that the reset is complete.

Posted on 3 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Vivaro?
How to Reset the Service Light on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) To reset the Service light on the Opel Vivaro, press and hold the CHECK button located in the centre of the instrument cluster while it is off. Conti…
How to Reset the Service Light on the Opel Vivaro
How to Reset the Service Light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Reset the service light only after completing the servicing operations. To reset the service light on the Opel Vivaro, follow the same steps as for r…
How to Reset the Service Light on the Opel Vivaro
How to Reset the Service Light on the Opel Vivaro
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) Today, you will learn how to reset the service light on the Opel Vivaro independently and for free, without using a diagnostic computer. To reset the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos