Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the accessory belt of the Opel Meriva 1.7 CDTI?

Model: Vauxhall Meriva MK 2, Meriva B - Years 2010-2017
Part: Checks and maintenance

The drive belt is responsible for operating, precisely, the services, the water pump, the air conditioner, and so on. It is a material, rubber, destined to wear out over time and that is why it needs to be replaced periodically, at time intervals or kilometers, this can be verified by consulting the vehicle's user manual. The video provides a detailed guide on how to proceed with the work: open the hood, remove the Airbox for convenience, lift the vehicle on the front right side, and proceed to loosen the belt tensioner, so that it can be removed. For the installation of the new one, the process is reversed.

Posted on 5 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Meriva (2010-2017 / MK 2, Meriva B) To replace the timing belt on the Opel Meriva, lift the car to remove the front wheel and the inner cover of the wheel arch. Next, open the bonnet an…
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Below are the instructions for removing and replacing the starter motor of the Opel Meriva 1.7 CDTI, following these simple and quick steps. First, l…
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) The 1.7 CDTi engine in the Opel is generally reliable but has some critical points to be aware of. The main issue is the injection pump control unit,…

Other guides you may be interested in

    Frequently Asked Questions

    • Meriva 2010-2017 - What are the most common problems of the Opel Meriva B? Read answer
    • Meriva 2010-2017 - What problems does the power steering of the Opel Meriva have? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos