Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Meriva
  6. : Disassembly of the starter motor of the Opel Meriva 1.7 CDTI

Vauxhall Meriva - Video tutorial

Model: Vauxhall Meriva MK 1, Meriva A - Years 2003-2010
Part: Starter motor
Operation: Disassembly of the starter motor of the Opel Meriva 1.7 CDTI

Below we will see the instructions on disassembling and replacing the starter motor of the Opel Meriva 1.7 CDTI, following these simple and quick steps. First of all we lift the car and begin to identify our starter motor; we use a socket or star wrench to unscrew the fixing screws of the starter motor, disconnecting the electrical power connectors to remove it, as shown in the video. At this point we replace our starter motor with the new one, with the original spare part, applying the opposite procedure of disassembly!


Posted on 20 May 2024 by ScegliAuto



How to replace the starter motor of the Opel Meriva
Vauxhall Meriva (2010-2017 / Meriva B, MK 2) First we disconnect the negative battery connector to protect the electronic instruments, now you will also have to remove the battery platform and a
How to remove the starter motor of the Opel Meriva
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) Open and lift the hood, now disconnect the negative battery connector to protect the electronic instruments, now you will also have to remove the bat
Disassembly of the alternator on Opel Meriva A Ecotec
Vauxhall Meriva (2003-2010 / MK 1, Meriva A) In this video tutorial we will see how to remove and replace the starter motor on an Opel Meriva A Ecotec, first series. First of all we open the bon

    Frequently Asked Questions

    • Meriva 2003-2010 - What to do if you have a starter motor failure on your Opel Meriva? Read Answer
    • Meriva 2010-2017 - How much does the starter of an Opel Meriva 1.7 CDTI cost? Read Answer
    • Meriva 2003-2010 - Where is the starter motor of the Opel Meriva located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos