Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on an Opel Meriva

Model: Vauxhall Meriva MK 2, Meriva B - Years 2010-2017
Part: Starter motor

First, disconnect the negative battery terminal to protect the electronic components. You will also need to remove the battery tray and the fuel filter. Next, locate the starter motor, which is situated at the back of the alternator. To access it, raise your vehicle and support it on axle stands. Once located, unscrew the bolts securing it, disconnect the connectors, and also remove the central bolt on the starter motor accessible from the top of the engine bay. Now, replace the starter motor and retrace your steps for reinstallation.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor from the Opel Meriva 1.7 CDTI
Removing the Starter Motor from the Opel Meriva 1.7 CDTI
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Below are the instructions for removing and replacing the starter motor of the Opel Meriva 1.7 CDTI, following these simple and quick steps. First, l…
Replacing the Starter Motor on the Opel Meriva 1.6 16V
Replacing the Starter Motor on the Opel Meriva 1.6 16V
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this guide, you will learn the main steps to remove and replace the starter motor on the Opel Meriva 1.6 16V. First, open the bonnet of the vehicl…
How to Remove the Starter Motor from an Opel Meriva
How to Remove the Starter Motor from an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Open and lift the bonnet. Disconnect the negative battery terminal to protect the electronic components. You will also need to remove the battery tra…

Other guides you may be interested in

    Frequently Asked Questions

    • Meriva 2003-2010 - What to do if you have a starter motor failure on your Opel Meriva? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos