Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Starter Motor from an Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Starter motor

Open and lift the bonnet. Disconnect the negative battery terminal to protect the electronic components. You will also need to remove the battery tray and the fuel filter. Next, locate the starter motor, which is situated at the back of the alternator. To access it, raise your vehicle and support it on axle stands. Once located, unscrew the bolts securing it, disconnect the connectors, and also remove the central bolt on the starter motor accessible from the top of the engine bay. Now, replace the starter motor and retrace your steps for reinstallation.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor from the Opel Meriva 1.7 CDTI
Removing the Starter Motor from the Opel Meriva 1.7 CDTI
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Below are the instructions for removing and replacing the starter motor of the Opel Meriva 1.7 CDTI, following these simple and quick steps. First, l…
How to Replace the Starter Motor on an Opel Meriva
How to Replace the Starter Motor on an Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) First, disconnect the negative battery terminal to protect the electronic components. You will also need to remove the battery tray and the fuel filt…
Removing the Alternator from an Opel Meriva A Ecotec
Removing the Alternator from an Opel Meriva A Ecotec
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this video tutorial, you will learn how to remove and replace the starter motor on an Opel Meriva A Ecotec, first series. First, open the bonnet a…

Other guides you may be interested in

    Frequently Asked Questions

    • Meriva 2003-2010 - What to do if you have a starter motor failure on your Opel Meriva? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos