Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Opel Vivaro?

Model: Vauxhall Vivaro Vivaro C, MK 3 - Years 2019-2026
Part: Service warning light

You can completely eliminate the Service indicator light that appears on the instrument panel of the Opel Vivaro by holding down the CHECK button located in the center of the instrument panel while it is deactivated. By continuing to hold down the button, you can insert the ignition key into the corresponding slot so that the instrument panel is activated. In this way, you can verify that a countdown will start from ten on the instrument panel; at the end of the countdown, you can release the CHECK button, and you will notice that the Service indicator light has disappeared.

Posted on 16 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Vivaro?
How to Reset the Service Light on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) To reset the Service light on the Opel Vivaro, press and hold the CHECK button located in the centre of the instrument cluster while it is off. Conti…
How do you reset the Service light on the Opel Vivaro?
How do you reset the Service light on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) The Service light that comes on in the instrument panel of the Opel Vivaro can be reset by holding down the CHECK button located in the center of the…
How to reset the Service light on the Opel Vivaro?
How to reset the Service light on the Opel Vivaro?
Vauxhall Vivaro (2001-2014 / MK 1) To reset the Service light on the Opel Vivaro, press the accelerator pedal while simultaneously turning the key to position two to switch on the inst…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos