Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter in the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Air filter

See other generations:
Video tutorial

In this tutorial, we can see how to replace the air filter in the Opel Mokka, a very simple and quick operation. First of all, make sure that the engine is completely cold, then open the hood and locate the filter box. Next, disconnect the sensor connector indicated, unscrew the two screws at the corners of the box, lift it up and remove the old filter.

At this point, all that's left to do is to clean the inside of the housing from any dirt residue, insert the replacement filter, and reassemble everything following the reverse procedure.


Posted on 25 October 2025 by ScegliAuto


Related tutorials

How do you replace the air filter of the Opel Mokka?
How do you replace the air filter of the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) It will be possible to replace the air filter of the Opel Mokka by opening the hood to access the components inside the engine compartment: here it w…
How to Change the Cabin Air Filter on the Opel Mokka X
How to Change the Cabin Air Filter on the Opel Mokka X
Vauxhall Mokka (2012-2019 / Mokka A) If you want to discover how to correctly change the cabin air filter of your Opel Mokka X, then you are in the right place. In the following guide, y…
How to change the air filter on the Opel Mokka CDTI
How to change the air filter on the Opel Mokka CDTI
Vauxhall Mokka (2012-2019 / Mokka A) In this short video, see how to remove and replace the engine air filter on the Opel Mokka CDTI, as well as on the petrol version. First, open the bo…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos