Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the direction of the airflow in a Nissan Vivaro.

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Air vents

See other generations:
Video tutorial

In this video, we can see how to fix the issue with the airflow that cannot be controlled by the air conditioning knobs in a Nissan Vivaro. Naturally, the same system applies to the Renault Trafic and the Nissan Primastar as well.

First, we need to remove the lower dashboard cover, which also houses the gear lever. This will allow us to take off the air conditioning control panel, from which we will remove the cable that controls the airflow.

Let's take it out and clean it thoroughly with WD-40, which will properly lubricate it. Then, we will put it back in place and check its functionality. Finally, we will close the panel and then the cover, and we're all set.


Posted on 22 December 2025 by ScegliAuto


Related tutorials

How to Set the Airflow Direction of the Air Conditioning in the Opel Vivaro
How to Set the Airflow Direction of the Air Conditioning in the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Today, we will explain how to change the airflow direction of the air conditioning in the Opel Vivaro model B. Start the vehicle and press the air co…
How to Change the Cabin Air Filter in an Opel Vivaro?
How to Change the Cabin Air Filter in an Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) To replace the cabin air filter in an Opel Vivaro, open the passenger door and locate the access panel situated at the bottom of the dashboard. Remov…
How to Change the Air Filter on the Opel Vivaro MK2
How to Change the Air Filter on the Opel Vivaro MK2
Vauxhall Vivaro (2014-2019 / MK 2) In this video, you will see how to change the air filter on the Opel Vivaro MK2: open the bonnet. The filter housing is located at the top left, just…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos