Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter in an Opel Vivaro?

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin air filter in an Opel Vivaro, open the passenger door and locate the access panel situated at the bottom of the dashboard. Remove the filter housing cover by detaching the clips or unscrewing the fixing screws, depending on the version.

Carefully extract the old filter to avoid dispersing dust and debris into the duct. Clean the inside of the housing if necessary, then insert the new filter, ensuring the airflow direction matches the arrows printed on the replacement.

Refit the cover, secure it properly, and check that it is firmly in place before completing the task.


Posted on 29 June 2026 by ScegliAuto


Related tutorials

Where is the Cabin Air Filter Located on the Opel Vivaro?
Where is the Cabin Air Filter Located on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) The cabin air filter on the Opel Vivaro is located inside the front bonnet. This filter is very important as it purifies the incoming air, which is e…
How to change the pollen filter on Opel Vivaro
How to change the pollen filter on Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) In this video, we will see how to change the cabin air filter of the Opel Vivaro MK2: the filter is located under the front hood, on the left, beneat…
How to Replace the Cabin Filter on the 2020 Opel Vivaro
How to Replace the Cabin Filter on the 2020 Opel Vivaro
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) If you own a 2020 Opel Vivaro Mk3 and want to replace the cabin air filter yourself, simply read the following guide carefully and follow the instruc…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos