Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the pollen filter on Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Cabin air filter

See other generations:
Video tutorial

In this video, we will see how to change the cabin air filter of the Opel Vivaro MK2: the filter is located under the front hood, on the left, beneath a large rectangular cover. We lift the two tabs that cover it and then remove the filter.

We thoroughly clean the container of dust and debris using a blast of compressed air and a soft cloth, ensuring that the clean filter is placed in a clean environment. Then we insert the new filter in its place, paying attention to the arrows drawn on it that indicate the direction of installation: they should always point downwards.

We close the access cover, and the job is done.


Posted on 21 December 2025 by ScegliAuto


Related tutorials

How to Change the Air Filter on the Opel Vivaro MK2
How to Change the Air Filter on the Opel Vivaro MK2
Vauxhall Vivaro (2014-2019 / MK 2) In this video, you will see how to change the air filter on the Opel Vivaro MK2: open the bonnet. The filter housing is located at the top left, just…
Where is the Cabin Air Filter Located on the Opel Vivaro?
Where is the Cabin Air Filter Located on the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) The cabin air filter on the Opel Vivaro is located inside the front bonnet. This filter is very important as it purifies the incoming air, which is e…
How to Replace the Cabin Filter on the 2020 Opel Vivaro
How to Replace the Cabin Filter on the 2020 Opel Vivaro
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) If you own a 2020 Opel Vivaro Mk3 and want to replace the cabin air filter yourself, simply read the following guide carefully and follow the instruc…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos