Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Warning Light

Model: Vauxhall Karl MK 1 - Years 2015-2019
Part: Service warning light

To reset the service warning light on the Opel Karl dashboard, first, turn on the ignition by turning the key. At this point, press the button located at the top of the lever to the left of the steering wheel until the message "Vehicle Information Menu" appears on the dashboard. Now, rotate the top of the lever until the message "Remaining Oil Life" appears on the dashboard. Press the button at the top of the lever again while simultaneously pressing the brake pedal. Hold both for 2 to 3 seconds, then turn off the ignition by turning the key. At this point, the job is done!

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" warning light on an Opel Karl
How to reset the "Service" warning light on an Opel Karl
Vauxhall Karl (2015-2019 / MK 1) Before we can start, we will have to turn on the instrument panel by turning the key to position 1, but without starting the engine. So let's start b…
How to reset the service light of the Opel Karl
How to reset the service light of the Opel Karl
Vauxhall Karl (2015-2019 / MK 1) To reset the service light on an Opel Karl vehicle, it is essential that all necessary maintenance operations have been carried out in the workshop f…
To reset the service light of the Opel Karl.
To reset the service light of the Opel Karl.
Vauxhall Karl (2015-2019 / MK 1) Below we will see the instructions that will allow us to reset the engine oil light of the Opel Karl. First of all, we get into the car and start the…

Other guides you may be interested in

How to Replace the Brake Pads on a BMW X3

For this operation, you will need to remove the wheel where you will perform the replacement, so it will be convenient to lift your vehicle and place it on jack stands; this way, you will work much more comfortably. To remove the spring that holds the front pads, use a flathead screwdriver. Now, unscrew the bolts that secure the piston to the pads, then remove it, giving you access to both pads that brake the rotor. Of course, repeat the same steps on the other side if the same replacements are needed.

Watch the video!


by ScegliAuto

More videos