Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Opel Vivaro B

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Service warning light

Let's see how to reset the service light on an Opel Vivaro B: turn on the instrument panel and from the wiper lever (the one on the left of the steering wheel), find the navigation buttons (up/down/ok). Press one of the up/down buttons repeatedly until the "service information" screen appears, with a wrench icon. Start the reset procedure by holding down the "ok" button (the end of the wiper lever) for 5-10 seconds. A message will appear on the display saying "reset?" To confirm, hold down the same button again for a long time. If done correctly, the display will show a confirmation message and the mileage counter will reset to the maximum value (30,000 miles and 365 days).

Posted on 9 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Vivaro
How to Reset the Service Light on the Opel Vivaro
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) Today, you will learn how to reset the service light on the Opel Vivaro independently and for free, without using a diagnostic computer. To reset the…
How to Reset the Service Light on an Opel Vivaro
How to Reset the Service Light on an Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Here’s how to reset the Service light on the Opel/Vauxhall Vivaro: first, get in the vehicle and close all the doors; also engage the handbrake. Then…
How to reset the service light on the 2018 Opel Vivaro
How to reset the service light on the 2018 Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Today we will illustrate the steps to reset the service light, related to the maintenance, of the 2018 Opel Vivaro. We start by turning on the instru…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos