Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Chain on the Opel Vivaro 1.6 CDTi

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Timing belt

Here are the main instructions on how to dismantle and replace the timing chain on the Opel Vivaro 1.6 CDTi. First, lift the vehicle and begin disconnecting the serpentine belt from the pulleys; then remove the crankshaft pulley by unscrewing the central bolt, followed by removing the cylinder head cover and the side cover of the timing system. At this point, remove the timing chain guides and subsequently the chain (taking necessary references); install the new original chain and reassemble all other components.

Posted on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Chain on the Opel Vivaro?
How to Replace the Timing Chain on the Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) To replace the timing chain on the Opel Vivaro, loosen the bolts securing the right front wheel, removing the inner lining of the wheel arch along wi…
How to replace the timing chain on the Opel Vivaro?
How to replace the timing chain on the Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) To replace the timing chain on the Opel Vivaro, lift the vehicle and remove the front right wheel along with the corresponding wheel arch cover. This…
Guide to Replacing the Timing Belt on the Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) This guide provides instructions on how to replace the timing belt on the Opel Vivaro, as well as the Renault Trafic. First, open the bonnet and star…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos