Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Shock Absorbers on an Opel Astra H

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Shocks

See other generations:
Video tutorial

This video shows how to replace the shock absorbers on an Opel Astra H: you can find new parts, for example, on auto-doc with code JGT286T at a price of £23.29 each + £9.95 shipping for the pair. Lift the car, remove the wheel, locate the lower bolt that connects the shock absorber to the rear arm and unscrew it (it may be rusted, so WD-40 will be needed).

In the boot, lift the cover of the wheel well and find the torx bolts that secure the shock absorber to the body; gently pull it down to extract it, and if it is stuck, use a rubber mallet for assistance. Position the new shock absorber in the upper housing, and hand-tighten the torx bolts without fully tightening them; then connect the lower part, tightening it to 90 Nm; then you can also tighten the upper part to 50/60 Nm. Refit the wheel and repeat on the other side.


Posted on 11 March 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2004-2010 / Astra H) Today's guide will show you the procedure for removing and replacing the rear seats of the Opel Astra. First, open the rear doors and start pulling t…
Vauxhall Astra (1998-2006 / Astra G) Once the vehicle is positioned on suitable axle stands and the wheels are removed, proceed to remove the front shock absorbers by unscrewing the nut …
Vauxhall Astra (2004-2010 / Astra H) This tutorial shows how to replace the rear light bulbs on an Opel Astra, a very simple and quick operation. First, ensure that the key is not in the…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos