Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the ESP on the Opel Corsa e

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

The vehicle reviewed in the video is the Opel Corsa e, and we want to know how to disable the electronic stability control, namely the ESP. It is strongly advised against disabling this control, and it should only be considered in rare cases, such as testing the vehicle after certain repairs.

To disable it, press the button depicting a skidding car, found on the dashboard.

The same procedure applies to reactivate it; simply press the same button again.


Posted on 20 March 2026 by ScegliAuto


Related tutorials

How to Reset the ESP Light on the Opel Corsa D
How to Reset the ESP Light on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) If you notice the orange ESP light appearing when you start your Opel Corsa D, it indicates a fault with the steering angle sensor, and a manual rese…
How to Disable ESP in the Opel Corsa
How to Disable ESP in the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) In today's video, see how to disable the stability and traction control in the Opel Corsa D, the fourth generation of the German supermini. This oper…
Fitting an ESP Disable Switch on an Opel Corsa D
Fitting an ESP Disable Switch on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) This guide explains how to fit a switch to manually disable the ESP on an Opel Corsa D, using an unused switch location. Not all BCM modules support …

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos