Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the LED bulb in the reverse light of the Opel Grandland X

Model: Vauxhall Grandland X MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Light bulb

See other generations:
Video tutorial

Let's see how to replace the reverse light bulb with an LED in an Opel Grandland X: Open the tailgate, where you will find the access cover to the light on the side panel inside the loading area. Remove the cover and loosen the fixing nut. The light unit is also held by a clip; release it by gently pressing the bulb from inside the boot.

From outside the car, take the light unit and pull it out of its housing, being careful of the cable that remains attached. Rotate the bulb holder counter-clockwise and replace the bulb with the LED. Reassemble everything in reverse order.

Before securing, perform a functionality test to see if the light turns on correctly. If it works, secure the light unit.


Posted on 17 May 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on an Opel Grandland X
How to Reset the "Service" Light on an Opel Grandland X
Vauxhall Grandland X (2017-2024 / MK 1) Before you begin, ensure that the service has been carried out. Next, sit in the driver's seat of your Opel Grandland X. Start by pressing the start …
How to Reset the "AdBlue" Warning Light on an Opel Grandland?
How to Reset the "AdBlue" Warning Light on an Opel Grandland?
Vauxhall Grandland X (2017-2024 / MK 1) Good morning, today you will reset the "AdBlue" warning light on your Opel Grandland. Before doing this, you must refill the AdBlue. Start by turning…
How to replace the cabin filter on the Opel Grandland X?
How to replace the cabin filter on the Opel Grandland X?
Vauxhall Grandland X (2017-2024 / MK 1) To replace the cabin filter on the Opel Grandland X, completely detach the panel located on the dashboard just below the steering column: once this p…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos