Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Opel Combo 2024

Model: Vauxhall Combo Combo E, MK 5 - Years 2019-2026
Part:

Here’s how to reset the TPMS warning light on the latest Opel Combo: this is done directly from the cabin. Turn on the instrument panel after checking the tyre pressures against the values indicated on the label on the driver’s door pillar. On the touchscreen, look for the "vehicle options" menu and select "tyre pressure monitoring". Then find "reset TPMS"; the system will prompt you to complete the procedure, and you will see a confirmation message on the display saying "recalibration in progress". Turn off the vehicle and then take a ten-minute drive so the system can learn the new settings, allowing the warning light to turn off.

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Opel Combo E
How to Reset the Tyre Pressure Warning Light on the Opel Combo E
Vauxhall Combo (2019-2026 / Combo E, MK 5) If you want to manually reset the tyre pressure warning light on your Opel Combo E but are unsure of the steps, read the following guide and apply th…
How to reset the tyre warning light in an Opel Combo van?
How to reset the tyre warning light in an Opel Combo van?
Vauxhall Combo (2019-2026 / Combo E, MK 5) Resetting the tyre warning light in an Opel Combo van is a very simple and quick operation; let's see how to proceed in this tutorial. Before doing t…
How do you reset the tire pressure warning light on the Opel Combo?
How do you reset the tire pressure warning light on the Opel Combo?
Vauxhall Combo (2019-2026 / Combo E, MK 5) It will be possible to reset the tire pressure warning light on the Opel Combo by inflating the tires until they reach the correct pressure value: th…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos