Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Tyre Pressure on an Opel/Vauxhall Corsa E

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

To check and inflate the tyres of the Opel/Vauxhall Corsa E, open the passenger door and read the label with the recommended pressures located on the door pillar. The values are indicated in kPa. (to convert to bar, simply divide by 100: the conversion to PSI is more complicated: you need to multiply by 0.145). Remove the valve cap from the first tyre.

Connect the pressure gauge/inflator, press the "+" button to inflate (in short bursts, one second at a time) until you reach the desired value. If necessary, use the "-" button to deflate.

Once the correct pressure is reached, disconnect the gauge and replace the cap. Repeat for all wheels. Check the pressure when the tyres are cold (after at least two hours of standing) for an accurate reading.

Correct pressure improves safety, fuel consumption, and tyre longevity.


Posted on 16 July 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure sensor on Opel Corsa E
How to reset the tire pressure sensor on Opel Corsa E
Vauxhall Corsa (2014-2019 / Corsa E) Open the driver's side door and turn on the instrument panel of your Opel Corsa E. From the main menu, select "Vehicle" and then "Safety". Find the o…
How to Reset the Tyre Pressure Indicator on an Opel Corsa D
How to Reset the Tyre Pressure Indicator on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this tutorial, you will see how to reset the tyre pressure indicator on an Opel Corsa D. This operation is really very simple and can be done inde…
How to reset the tyre warning light on the Opel Corsa D?
How to reset the tyre warning light on the Opel Corsa D?
Vauxhall Corsa (2006-2014 / Corsa D) After restoring the tyre pressure due to a puncture or the natural deflation of the tyres over time, you need to manually reset the low pressure warn…

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos