Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Corsa
  6. : How do you remove the EGR valve from the Opel Corsa?

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Valve
Operation: How do you remove the EGR valve from the Opel Corsa?

In order to remove the EGR valve of the Opel Corsa, you need to open the hood so that you can have access to the components located inside the engine compartment: here you will need to remove the plastic cover from the top of the engine block, locating the valve at its rear part, between the engine block and the exhaust manifold. To remove it, you will need to disconnect the appropriate fixing bolts and connectors related to the sensors: at this point, it will be possible to completely remove the valve, replacing it with a new spare part and covering the engine block again with the appropriate plastic panel.


Posted on 25 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the EGR valve on the Opel Corsa Lite 1.4 located? Read Answer
    • Corsa 2006-2014 - Where is the EGR valve of the Opel Corsa located? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos