Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : Disassembly of the EGR valve on Opel Corsa

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: EGR valve
Operation: Disassembly of the EGR valve on Opel Corsa

If we have problems with the EGR valve it is better to remove it and replace it, let's see how it is disassembled on the Opel Corsa. Lift the bonnet and put it in safety, with a screwdriver unscrew the locking pins of the valve (disconnect the various pipes and electrical cables). Once the piece has been disassembled from its seat, let's unscrew the screws on it with a screwdriver if we need to clean it. We begin to clean the valve with the help of a product suitable for cleaning mechanical parts, we use a brush to facilitate operations. We mount the EGR valve in the engine compartment, after having cleaned it of any traces of dirt and encrustations. We mount the various wirings in the engine compartment, screw in the tightening screws.


Posted on 1 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Corsa 2014-2019 - Where is the EGR valve located on the Opel Corsa E? Read Answer
    • Corsa 2006-2014 - Where is the EGR valve located on the Opel Corsa 1.3 TDCi? Read Answer
    • Corsa 2006-2014 - What is the position of the EGR valve in the Opel Corsa D? Read Answer
    • Corsa 2000-2006 - What are the problems with the EGR valve of the Opel Corsa 1.3 CDTi? Read Answer
    • Corsa 2000-2006 - Where is the EGR valve located in the Opel Corsa? Read Answer
    • Corsa 2006-2014 - Where is the EGR valve located in an Opel Corsa d? Read Answer
    • Corsa 2000-2006 - Where is the EGR valve of the Opel Corsa C series CDTi 1.3? Read Answer
    • Corsa 2006-2014 - Where is the EGR valve of an Opel Corsa located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos