Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

In this brief video tutorial today, we will see how to reset the oil change light on an Opel Mokka, first generation model produced from 2012 to 2019, using only the controls on the left stalk of the steering wheel. Start the operation by turning on the ignition of your vehicle, then press the MENU button and, using the scroll wheel, navigate through the various screens until you reach the option related to the remaining oil life.

After doing this, press the end button to request the reset and finally confirm the operation as shown in the video to complete the job.


Posted on 11 September 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on an Opel Mokka
How to Reset the "Service" Light on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you begin, sit in the driver's seat of your Opel Mokka. Start by activating the instrument cluster by turning the key to position one. Next, p…
How to Reset the Service Light on My Opel Mokka
How to Reset the Service Light on My Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this brief guide, learn how to easily reset the oil service light on your Opel Mokka. To reset the light, first turn on the ignition. Then, use th…
How to reset the service light on the 2018 Opel Mokka
How to reset the service light on the 2018 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) To correctly reset the service light of your first-generation Opel Mokka (year 2018), you need to carefully read the following procedure and apply it…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos