Do it yourself
| ||||
|
Vauxhall Mokka - Video tutorial
Model: Vauxhall Mokka
Mokka A
- Years 2012-2019 Before we can start, we will have to go and sit in the driver's seat of our Opel Mokka. So let's start by activating the instrument panel, simply by turning the key to position one. After that, we will have to go and press the "MENU" button, thus accessing the settings menu. We then proceed by selecting the "oil life" item. At this point, we will have to press the "SET / CLR" button, and then confirm our willingness to perform the reset "YES". When we have completed this step, we will have successfully completed the reset of the "Service" warning light on our Opel Mokka.
Posted on 14 January 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |