Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Service warning light

To reset the Oil Service light on the Opel Mokka, turn on the ignition by rotating the key in the ignition switch. Press the MENU button located on the lever to the left of the steering wheel until the oil life remaining is displayed. When this screen appears, press and hold the SET/CLR button at the end of the left lever. Once the confirmation message appears, select "Yes" to ensure the light is reset correctly.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on an Opel Mokka
How to Reset the "Service" Light on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you begin, sit in the driver's seat of your Opel Mokka. Start by activating the instrument cluster by turning the key to position one. Next, p…
How to reset the service light on the 2019 Opel Mokka
How to reset the service light on the 2019 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) If the oil light on the instrument panel of your 2019 Opel Mokka continues to stay on even after you have already changed the oil and the filter, the…
How to reset the Service light on the Opel Mokka?
How to reset the Service light on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) To reset the Service light on the Opel Mokka, switch on the instrument cluster and then press the MENU button located on the lever to the left of the…

Other guides you may be interested in

    Frequently Asked Questions

    • Mokka 2012-2019 - How do you reset the service light on the Opel Mokka? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos