Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs of an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Headlight bulb

Learn how to replace the front headlight bulbs of an Opel Corsa. Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Remove the covering plastic; take off the inspection cap of the headlight (located at the rear of the headlight) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulbs using a screwdriver. Fit the new bulbs (always the correct type and size) and insert the bulb holder back into the headlight housing. Reassemble all the removed parts.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Front Headlight Bulbs on Opel Corsa
Replace Front Headlight Bulbs on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Are the bulbs in your Opel Corsa blown and need replacing? Here’s how to change them in the front headlight. Open the front bonnet by pulling the lev…
How to Replace the Front Headlights on the Opel Corsa
How to Replace the Front Headlights on the Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) In today's video, you will learn how to replace the bulbs in the front headlights on the Opel Corsa, as well as the headlight units themselves. First…
How to Change the Headlight Bulbs on an Opel Corsa
How to Change the Headlight Bulbs on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Open the bonnet by pulling the lever located at the bottom right of the dashboard (secure it with the prop rod). Locate the inspection cap of the hea…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos