Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Front Headlight Bulb in an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

First, position the car on a ramp or a flat surface, securely immobilised. To replace the front headlight bulb on the passenger side, open the bonnet and remove the airbox cover, located just behind the headlight assembly.

Unscrew the four screws that secure it in place and the air duct connected to it. You can also remove the rest of the airbox, following the instructions shown in the video. Now, you have easier access to the headlight for bulb replacement.

Remove the water and moisture protection cover and extract the H7 bulb from its socket. Replace it with the new one and you're done! Reassemble everything, following the steps shown but in reverse order.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

How to Change the Headlight Bulb on the Opel Corsa
How to Change the Headlight Bulb on the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Below are the instructions that will allow you to change the dipped beam bulb of the front headlight on the Opel Corsa. First, open the vehicle's bon…
How to replace the front headlight bulb on an Opel Corsa D
How to replace the front headlight bulb on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) If you own an Opel Corsa D and need to replace one of the front headlight bulbs yourself, simply read the following guide carefully and apply all the…
How to Change the Headlight Bulb on the Opel Corsa
How to Change the Headlight Bulb on the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) This guide shows you how to remove and replace the headlight bulb on your Opel Corsa, following the instructions below. First, open the bonnet of you…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos