Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Steering Arm Ball Joint on an Opel Corsa

Model: Vauxhall Corsa Corsa B - Years 1993-2000
Part: Tie rods

In this video tutorial, you will see how to remove the ball joint of the steering arm on an Opel Corsa. First, lift the vehicle and remove the front wheel by unscrewing the bolts; then, using a 17 mm socket, unscrew the bolt that holds the ball joint. Leverage the top while unscrewing, as shown in the video. With a 19 mm spanner, unscrew the nut of the arm and then unscrew the ball joint to fit the new one: screw it in by hand and then tighten it, lubricating the components!

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Steering Arm Replacement on Opel Corsa D
Steering Arm Replacement on Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this video tutorial, you will learn how to remove the steering arm from an Opel Corsa. First, remove the front wheel by taking off the bolts and l…
Replacing Cabin Air Filter on Opel Corsa
Replacing Cabin Air Filter on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replace the cabin air filter on the Opel Corsa. Open the front right door. Remove the securing plastics from the filter cover (under the dashboard an…
Guide to Replacing the Timing Chain on the Opel Corsa 1.0
Guide to Replacing the Timing Chain on the Opel Corsa 1.0
Vauxhall Corsa (2006-2014 / Corsa D) The information below will assist you in the process of dismantling and replacing the timing chain on the Opel Corsa 1.0. The timing chain replacemen…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos