Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Spark plugs

In this video, you will learn how to remove the spark plugs from the engine of an Opel Corsa. First, open the bonnet and remove the engine cover by unclipping it. Then, unscrew the Torx screws with a screwdriver or a spanner and disconnect the electrical connector located on the right. Start removing the spark plugs: use a socket wrench with an extension and finish unscrewing by hand; repeat the same process for the other spark plugs. Now, replace them with new ones, tightening to the correct torque: then refit everything!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Spark Plugs on the Opel Corsa
Replacing the Spark Plugs on the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Today, you will learn how to remove and replace the engine spark plugs on the Opel Corsa in simple and quick steps. First, open the bonnet of your ca…
How to Replace the Spark Plugs on an Opel Corsa
How to Replace the Spark Plugs on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can start, open the bonnet of your Opel Corsa. Begin by removing the engine cover. This will give you the necessary space to work on the e…
How to Replace the Spark Plugs on an Opel Corsa?
How to Replace the Spark Plugs on an Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) To replace the spark plugs on an Opel Corsa, open the bonnet to access the engine bay and remove the plastic cover from the top of the engine. Next, …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos