Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Antenna on an Opel Corsa

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Antenna

In today's video, we will see how to remove the antenna on an Opel Corsa C. First, remove the roof clips located at the rear and then unclip the headlining from the boot area, as shown in the video. This allows access to the rear of the antenna: there is a 17 mm nut that you will need to unscrew with the appropriate spanner. Then remove the antenna from the outside of the car by pulling it off: if desired, replace the antenna base or remove it completely to fit a new one.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Antenna on an Opel Corsa C
Removing the Antenna on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In today's video tutorial, you will learn how to remove and replace the antenna along with its base on an Opel Corsa C, following the instructions be…
Replacing the Radio Antenna on Opel Corsa 2006
Vauxhall Corsa (2006-2014 / Corsa D) Replacing the original antenna on the Opel Corsa is a relatively simple task, useful when you want to install a new one mainly for aesthetic reasons …
How to Replace the Radio on an Opel Corsa
How to Replace the Radio on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Remove the radio to replace it with a newer model. Insert the release keys into the holes on the plastic cover of the stereo, pull the stereo towards…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos