Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Headlamp Bulb

Model: Vauxhall Astra Astra H - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear light bulbs, you need to remove the entire light assembly. The screw is accessible on the side of the boot after removing the large plastic cap by leveraging with a plastic tool in the designated slot.

Unscrew the large retaining knobs of the headlamp located under the cover and remove the light by disconnecting the connectors. Carefully remove the bulb holder, replace the faulty bulb by pressing it slightly and turning it anti-clockwise until it unlocks.

Refit the new bulb using one with the same specifications. Reposition the light assembly in the housing by connecting the respective connector.

Carefully tighten the fixing screw and close the plastic cap.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing belt of the Opel Astra 2.0 CDTi
Guide to replacing the timing belt of the Opel Astra 2.0 CDTi
Vauxhall Astra (2009-2016 / Astra J) In this guide, we will see information regarding the disassembly and replacement of the timing belt of the Opel Astra 2.0 CDTi. On this type of engin…
Replacing the Rear Light Bulbs of an Opel Astra H
Replacing the Rear Light Bulbs of an Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) Replacing the bulbs of the rear light of the Opel Astra H is quite simple but first requires removing the light itself; start by opening the rear hat…
Valve Stem Seal Replacement
Valve Stem Seal Replacement
Vauxhall Astra (1998-2006 / Astra G) Valve stem seals are a part of your vehicle's maintenance. The following guide shows how to replace this part. Although it may seem difficult at firs…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos