Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Cabin air filter

See other generations:
Video tutorial

Before starting, sit in the front passenger seat of your Opel Corsa. Begin by unscrewing and removing the screws that secure the lower cover of the glove compartment.

By doing so, you will reach the protective flange of the cabin air filter, which you will need to remove. Once you have removed the protective flange, you will access the filter.

At this point, you should not pull it out of its housing. When you have completed this step, you will have finished the disassembly.

To fit the new filter and close everything up, simply repeat this procedure in reverse, and the replacement will be complete.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter on Opel Corsa
Replacing Cabin Air Filter on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replace the cabin air filter on the Opel Corsa. Open the front right door. Remove the securing plastics from the filter cover (under the dashboard an…
How to Replace the Cabin Air Filter on an Opel Corsa B
How to Replace the Cabin Air Filter on an Opel Corsa B
Vauxhall Corsa (1993-2000 / Corsa B) Replacing the cabin air filter on your Opel Corsa B can be a bit complex for those not familiar with this type of task, but with the following guide,…
How to Replace the Cabin Air Filter in an Opel Corsa
How to Replace the Cabin Air Filter in an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) How to replace the cabin air filter in an Opel Corsa? Start by removing the cover located at the bottom of the glove compartment (unscrew the securin…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2006-2014 - Where is the cabin filter of the Opel Corsa 2008 located? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos