Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vectra
    4. : Disassembly of the instrument panel to replace the bulb

Vauxhall Vectra - Video tutorial

Model: Vauxhall Vectra MK 2, Vectra B - Years 1995-2002
Part: Instrument cluster
Operation: Disassembly of the instrument panel to replace the bulb

Removing the entire instrument panel is neither quick nor easy. In order not to damage plastic parts during the removal and assembly operation, place a rag or something similar on the steering column. Remove the various plastic covers until you reach the base of the panel, which hides the three fixing screws. Remove the three screws and, very carefully, slide the entire instrument panel outwards, paying attention to the various connection connectors on the rear. Remove all connectors very carefully to avoid tearing any wires. Replace the faulty bulb and refit the instrument panel by proceeding in reverse order. Check for perfect functioning.


Posted on 12 July 2023 by ScegliAuto



How to replace the instrument cluster bulb on the Opel Vectra
Vauxhall Vectra (1995-2002 / MK 2, Vectra B) We will see below the instructions which will allow us to disassemble and replace the bulbs of the instrument cluster of the Opel Vectra. First of al
How to remove the instrument cluster of an Opel Vectra
Vauxhall Vectra (2002-2008 / MK 3, Vectra C) How to remove the instrument cluster of an Opel Vectra? Let's see carefully in this video how to proceed with the correct disassembly without a hitch
Rear light bulb replacement
Vauxhall Vectra (1995-2002 / MK 2, Vectra B) In order to replace the bulb it is necessary to remove the lamp holder by accessing the rear luggage door: then remove the carpet panel covering the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos