Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster Bulb in the Opel Vectra

Model: Vauxhall Vectra Vectra B, MK 2 - Years 1995-2002
Part: Instrument panel light

Below are the instructions that will allow you to remove and replace the bulbs in the instrument cluster of the Opel Vectra. First, get inside the vehicle and start by removing the instrument cluster; to do this, remove the plastic cover of the steering wheel and unscrew the screws located on the sides of the cluster, as shown in the video. Next, disconnect the electrical connectors found at the back; then remove and replace the faulty small bulb with a new one, applying the reverse procedure for reassembly!

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlight Bulb on an Opel Vectra C
Replacing the Front Headlight Bulb on an Opel Vectra C
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) In this short and simple guide, discover the main instructions for removing and replacing the front headlight bulb on an Opel Vectra C, second series…
How to Replace the Front Headlight Bulb on an Opel Vectra?
How to Replace the Front Headlight Bulb on an Opel Vectra?
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) To replace the front headlight bulb on an Opel Vectra, open the bonnet to access the components inside the engine bay. Inside the headlight, locate t…
How to Replace the Rear Brake Bulb on the Opel Vectra
How to Replace the Rear Brake Bulb on the Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) To replace the rear brake bulb on the Opel Vectra, start by opening the boot. Remove the side cover of the headlamp that needs changing. Disconnect t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos