Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on an Opel Insignia

Model: Vauxhall Insigna Insigna A, MK 1 - Years 2008-2017
Part: Door trim panel

Before you begin, open the door of your Opel Insignia. Start by prising off and removing the door inserts with a flathead screwdriver, revealing the screws that secure the panel to the door, which you will need to unscrew and remove. Once you have removed all the screws securing the panel to the door, unclip the internal catches using the appropriate tool. When you have completed this step, you can remove the door panel, then disconnect the relevant cables and electrical connectors, successfully completing the removal.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on an Opel Insignia
How to Remove the Door Panel on an Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) Before you can start, open the door of your Opel Insignia. Begin by prising off and removing the door inserts using a flathead screwdriver. This will…
How to Remove the Door Panel on Opel Insignia
How to Remove the Door Panel on Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) In this video tutorial, learn how to remove the front door panel on a first-generation Opel Insignia in simple steps. First, open the front door and …
How to Replace the Cabin Air Filter on Opel Insignia
How to Replace the Cabin Air Filter on Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) If you want to change the cabin air filter on your first-generation Opel Insignia yourself, follow the procedure in this guide. First, purchase a new…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos