Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Headlight from an Opel Corsa D

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Headlight

Open the bonnet. Using a Torx T20, unscrew the fastening elements of the wheel arch. With a Torx T25, also unscrew the fastening elements of the bumper as shown in the video, and remove it. At this point, you can remove the headlight by unscrewing its screws. While pulling it out, be careful not to damage the surrounding parts, then disconnect the wiring while holding the headlight. At this point, you can remove all the lower covers and change the bulb you need: the headlight, fog light, or indicator. Simply unscrew the appropriate cover and then the relevant light. All these covers were inaccessible before disassembly, but now they are all there, within reach! Proceed in reverse order for reassembly.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight of an Opel Corsa
How to Replace the Front Headlight of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can begin, open the front bonnet of your Opel Corsa. Start by removing the front inner wheel arches and the bumper, unscrewing the securin…
How to Replace the Front Headlight on an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Do you want to replace the front headlight on an Opel Corsa? Follow these steps for disassembly as shown in the video. Open the front bonnet by pulli…
How to Remove the Front Headlight of the Opel Corsa?
How to Remove the Front Headlight of the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) This guide explains how to remove and replace the front headlight of the Opel Corsa in simple and quick steps. First, open the bonnet and start unscr…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos