Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Blower Resistor on Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

See how to remove the blower resistor from an Opel Corsa D. Locate the blower resistor under the glove compartment on the passenger side. Unscrew the securing screws located under the glove compartment and remove the plastic cover beneath it. Disconnect the large connector from the resistor, then extract it from the cabin.

Insert a new blower resistor (connect the power connector). Refit the cover and tighten the screws.

Turn on the ignition and operate the air blower to check its functionality.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Radiator Fan Resistor on an Opel Corsa
How to Replace the Radiator Fan Resistor on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can start, open the bonnet of your Opel Corsa. The fan resistor is located beneath the coolant expansion tank. Begin by disconnecting the …
How to Replace the Fan Resistor on an Opel Corsa
How to Replace the Fan Resistor on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) How to replace the fan resistor on an Opel Corsa. Start by removing the plastics under the glove compartment of the dashboard using a lever; unscrew …
Replacement of the cabin fan resistor of the Opel Corsa.
Replacement of the cabin fan resistor of the Opel Corsa.
Vauxhall Corsa (2006-2014 / Corsa D) Below we will see the information regarding the disassembly and replacement of the cabin fan resistor of the Opel Corsa. First, we open the front doo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos