Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Insigna
    4. : Removing the front bumper on Opel Insignia

Vauxhall Insigna - Video tutorial

Model: Vauxhall Insigna Insigna B, MK 2 - Years 2017-2024
Part: Front bumper
Operation: Removing the front bumper on Opel Insignia

Lift the hood and put on the special support rod. Start by unscrewing the bolts on the upper part of the bumper, as shown in the video. Then unscrew the fixing screws in the two wheel arches. Raise the car with a jack because now you also have to unscrew the lower bolts, ie those that secure the bumper from below. After unscrewing everything, you can finally remove the bumper: to do this try to work delicately in order to avoid damaging some parts, letting the bumper come out a little at a time from its seat until it is completely disassembled. This is a time-consuming but not very complex operation.


Posted on 29 January 2024 by ScegliAuto



Guide to disassembling the front bumper of the Opel Insignia.
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Today we will discover the procedure that will allow us to dismantle and replace the front bumper of the Opel Insignia, following the instructions pr
How to remove the front bumper of the Opel Insignia.
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Below we will see the steps that will allow us to disassemble and replace the front bumper of the Opel Insignia. First, we open the engine hood of ou
How do you remove the rear bumper of the Opel Insignia?
Vauxhall Insigna (2017-2024 / Insigna B, MK 2) In order to remove the rear bumper of the Opel Insignia you have to loosen the torx screws located near the rear lights, accessible by opening the ta

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos