Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Opel Insignia

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Front bumper

See other generations:
Video tutorial

Here are the steps to remove and replace the front bumper of the Opel Insignia. First, open the bonnet of your car and start unscrewing the fastening screws found both at the top and bottom of the bumper; then unscrew the additional screws located on both sides of the front wheel arches, as shown in the video.

Next, unclip the bumper from the sides until it is completely removed; replace the headlamps if necessary and refit the front bumper, following the video tutorial to the end!


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Guide to Removing the Front Bumper of the Opel Insignia
Guide to Removing the Front Bumper of the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Today, we will discover the procedure to remove and replace the front bumper of the Opel Insignia, following the instructions below. First, open the …
How to Replace the Cabin Air Filter on Opel Insignia
How to Replace the Cabin Air Filter on Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) If you want to change the cabin air filter on your first-generation Opel Insignia yourself, follow the procedure in this guide. First, purchase a new…
How do you remove the front bumper of the Opel Insignia?
How do you remove the front bumper of the Opel Insignia?
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) To remove the front bumper of the Opel Insignia, you need to open the hood so that you can loosen the screws that secure the bumper from the top; the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos