Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Right Front Wing on Opel Astra

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Front bumper

See other generations:
Video tutorial

Remove the bolts from the affected front wheel, lift the car with a jack, and fully unscrew them, removing the wheel. Lift the bonnet and unscrew the 10 mm bolts that are accessible from above, securing the right front wing of the vehicle.

Next, move to the area underneath the wing and remove all clips and bolts that are easily accessible after removing the wheel (all are clearly shown in the video). An additional bolt is located at the top and can be accessed by opening the door.

This way, you will first remove the wheel arch liner and then the wing. Good luck!


Updated on 13 April 2026 by ScegliAuto


Related tutorials

How to Remove the Wing of the Vauxhall Astra J?
How to Remove the Wing of the Vauxhall Astra J?
Vauxhall Astra (2009-2016 / Astra J) Vauxhall is simply the manufacturer Opel, which is recognised under this name in some countries. The Vauxhall Astra J in the video is therefore our w…
Removing the Windscreen Washer Pump from an Opel Astra G
Removing the Windscreen Washer Pump from an Opel Astra G
Vauxhall Astra (1998-2006 / Astra G) In this video tutorial, learn how to remove the windscreen washer pump from an Opel Astra G, second series, by following these simple steps. First, r…
Engine Management Unit Removal
Engine Management Unit Removal
Vauxhall Astra (1998-2006 / Astra G) Removing the engine management unit is not straightforward due to its particularly unfavourable position: the unit is located beneath the left front …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos